2 x 1.5Ah Li-Ion Batteries 60min Charging Time Driving Up to 1200 Nails Up to 37 Nail Magazine Capacity Hikoki NR90GC2/J8 7.2V Gas First Fix Framing Nailer with 2 x 1.5Ah Battery, Charger & Case The Hikoki NR90GC2/J8 First Fix Framing Nailer is also referred to as a framing nailer. They are used to complete rough woodwork, such as flooring, wood framing, timber frame erection, and roofing, mainly within the construction industry. They have cemented themselves as a serious player in the nailgun market. The competitive price and realiability of the machine make the NR90GC2 one of the most popular first fix nailers around. It is compatible with the majority of paper-collated 1st fix nails and fuel cells, meaning consumables are always easy to get hold of and existing stock can be used. This tool is essential for any first-time carpenter. Features: 2 x 1.5Ah li-ion batteries and 60 minute charger eliminates downtimeHigh driving power of 90JUp to 1200 nails per fuel cellLonger trigger stroke for safer useDry firing lockoutEasy to cleanEasy access fuel cell chamberQuick load rear access magazineTwo action nail feed; simply drop in the nails and pull back the feederHigh visibility magazineFold away hook fits over joists for greater convenienceLightweight, well balanced designNon-slip soft rubber grip Comes with: 2 x 7.2V 1.5Ah Li-Ion Batteries1 x UC18YG Battery Charger1 x Safety Glasses1 x 4mm Hex Wrench1 x Oil1 x Carry Case Product Specification: Barcode: 4966376297085Battery Capacity: 4000 nails/chargeFuel Cell Capacity: Up to 1200 nailsNail range: 50-90mmMagazine Capacity: 25-37 nailsNail Diameter Range: 2.9 - 3.3mmActuation Type: Full sequentialNail Angle: 34°Working Power: 90 joulesVibration Level: 3.5 m/s2 **images for illustrative purposes only – please refer to description and specification for full details of product**

Read more less

Brushless Motor No air hose or compressor required Tool free adjustment of drive depth 47 Nails Loading Capacity Low battery Indicator HiKOKI NR1890DCJPZ 18V Brushless First Fix Framing Nailer with 2 x 5.0Ah Batteries Charger & Type 4 Case The HiKOKI NR1890DCJPZ is a First Fix Framing Nailer used to complete rough woodwork, such as flooring, wood framing, timber frame erection, and roofing, mainly within the construction industry. With a loading capacity of 47 nails and a driving speed of 1.5-2 nails/sec (intermittent) you will be able to work quickly and efficiently. To adjust the drive depth is easy and tool free and there is no need for an air hose or compressor. The dry fire lockout system stops the nailer when fasteners are low, the air spring drive reduces recoil and its brushless motor makes it maintenance free. Features: Cordless framing nailer with brushless motor for longer run time, less maintenance and increased durabilityNo air hose or compressor requiredEliminates the cost of fuel cellsAir/spring drive system means less recoil, better flush driving and easier maintenanceHigh stable driving power allows the nailer to drives nails up to 90mm into lumber with easeSelective activation button; easily choose between sequential or bump fire modeTool free adjustment of drive depthLock switch and 30 minute automaticshutdown for increased safety and longer battery lifeDry fire lockout system prevents nailer from driving when fasteners are lowLow battery indicatorPivoting rafter hook Comes With: 2 x 5.0Ah Li-Ion Batteries1 x UC18YFSL Charger1 x Type 4 Stackable Sys Case1 x Safety Glasses Product Specification: Part Number: NR1890DCJPZBarcode: 4966376327829Driving System: Air springNail length: 50mm to 90mmDriving speed: 1.5 to 2 nails/sec. (intermittent)Loading capacity: 47 nailsFiring mode: Full sequential / ContactDimensions (H x L x W): 342 x 309 x 127mm **images for illustrative purposes only – please refer to description and specification for full details of product**

Read more less

Fires Length 3.3mm 50-90mm Fires up to 2/min Bump & Sequential Trigger Action Depth Adjustment HiKOKI NR1890DCJ6Z 18V Brushless First Fix Framing Nailer Body Only The HiKOKI NR1890DCJ6Z First Fix Framing Nailer is also referred to as a framing nailer. They are used to complete rough woodwork, such as flooring, wood framing, timber frame erection, and roofing, mainly within the construction industry. It's a completely new design. It has a cordless framing nailer with a brushless motor for longer run time, less maintenance and increased durability. A low battery indicator, pivoting rafter hook, and the ability to easily choose between sequential or bump fire mode are just a few of the features it has. Features: Drives 1.5 to 2 nails per sec. with zero ramp-up time and quicker response time between drivesOffers low-recoil and sets nails flush consistentlyNo combustion noise and no gas fumesConsistent performance even at low temperatures or high altitudes (The operating environment for these products is between 0° and 40°) Product Specification: Part Number: NR1890DC/J6ZBarcode: 4966376327812Driving System: Air springNail length: 50mm to 90mmDriving speed: 1.5 to 2 nails/sec. (intermittent)Loading capacity: 47 nailsFiring mode: Full sequential / ContactDimensions (H x L x W): 342 x 309 x 127mm **images for illustrative purposes only – please refer to description and specification for full details of product**

Read more less

Fires Length 3.3mm 50-90mm Fires up to 2/min Bump & Sequential Trigger Action Depth Adjustment HiKOKI NR1890DCJ6Z 18V Brushless First Fix 16GA Framing Nailer with 1 x 5.0Ah Battery & Charger The HiKOKI NR1890DCJ6Z First Fix Framing Nailer is also referred to as a framing nailer. They are used to complete rough woodwork, such as flooring, wood framing, timber frame erection, and roofing, mainly within the construction industry. It's a completely new design. It has a cordless framing nailer with a brushless motor for longer run time, less maintenance and increased durability. A low battery indicator, pivoting rafter hook, and the ability to easily choose between sequential or bump fire mode are just a few of the features it has. Features: HiKOKI NR1890DBCL First Fix Framing Nailer: Drives 1.5 to 2 nails per sec. with zero ramp-up time and quicker response time between drivesOffers low-recoil and sets nails flush consistentlyNo combustion noise and no gas fumesConsistent performance even at low temperatures or high altitudes (The operating environment for these products is between 0° and 40°) Comes With: 1 x 5.0Ah Li-Ion Battery1 x UC18YFSL Charger Product Specification: HiKOKI NR1890DBCL First Fix Framing Nailer: Part Number: NR1890DC/J6ZBarcode: 8906817417210Driving System: Air springNail length: 50mm to 90mmDriving speed: 1.5 to 2 nails/sec. (intermittent)Loading capacity: 47 nailsFiring mode: Full sequential / ContactDimensions (H x L x W): 342 x 309 x 127mm **images for illustrative purposes only – please refer to description and specification for full details of product**

Read more less

Fires Length 3.3mm 50-90mm Fires up to 2/min Bump & Sequential Trigger Action Depth Adjustment HiKOKI NR1890DCJ6Z 18V Brushless First Fix 16GA Framing Nailer with 1 x 5.0Ah Battery The HiKOKI NR1890DCJ6Z First Fix Framing Nailer is also referred to as a framing nailer. They are used to complete rough woodwork, such as flooring, wood framing, timber frame erection, and roofing, mainly within the construction industry. It's a completely new design. It has a cordless framing nailer with a brushless motor for longer run time, less maintenance and increased durability. A low battery indicator, pivoting rafter hook, and the ability to easily choose between sequential or bump fire mode are just a few of the features it has. Features: HiKOKI NR1890DBCL First Fix Framing Nailer: Drives 1.5 to 2 nails per sec. with zero ramp-up time and quicker response time between drivesOffers low-recoil and sets nails flush consistentlyNo combustion noise and no gas fumesConsistent performance even at low temperatures or high altitudes (The operating environment for these products is between 0° and 40°) Comes With: 1 x 5.0Ah Li-Ion Battery Product Specification: HiKOKI NR1890DBCL First Fix Framing Nailer: Part Number: NR1890DC/J6ZBarcode: 8906817417227Driving System: Air springNail length: 50mm to 90mmDriving speed: 1.5 to 2 nails/sec. (intermittent)Loading capacity: 47 nailsFiring mode: Full sequential / ContactDimensions (H x L x W): 342 x 309 x 127mm **images for illustrative purposes only – please refer to description and specification for full details of product**

Read more less

Magazine Capacity: 100 Practical and lightweight nailer Quick and easy to load Single or contact firing Draper D20NSSET D20 20V Nailer/Stapler With 1 x 2.0Ah Battery & Charger - 00646 The Draper D20NSSET 20V Nailer Stapler is a powerful and efficient nailer that can be used for single or contact firing and has a firing rate of 60 nails per minute. This nailer accepts Type 90 staples with a width of 19 to 40 mm and 18-gauge nails with a length of 20 to 50 mm. It can hold 100 rounds in a magazine and is quick and simple to load. This nailer is ideal for challenging work and demanding situations and can be used by both DIY enthusiasts and trade professionals. Features: Quick and easy to loadLightweight nailerPart of the D20 seriesSingle or contact firing Comes With: 1 x 2.0Ah Battery1 x Charger Product Specification: Part Number: D20NSSETBarcode: 5010559006465Battery: D20 20V Li-ionFiring Rate: 60 per minNail Gauge: 18Nail Length: 20-50Staples: Type: 90Staple Length: 19-40Magazine Capacity: 100Batteries Per Item: 1 x 2AhCharger Type: 1.65ASupplied in Case: Yes **images for illustrative purposes only – please refer to description and specification for full details of product**

Read more less

Fires 18ga 15-50mm Brads Up to 150 Nails/min 2 Type Trigger Sequential & Bump Depth Adjustment DeWalt DPN1850PP 18 Gauge 15-50mm Oil-Free Brad Nailer The DeWalt DPN1850PP Pneumatic Oil-Free 18 Gauge Brad Nailer is fitted with a Precision Point nose. That has a unique contact detect system for reduced marking of the work surface. 80% nose tip reduction for improved accuracy and visibility. The selectable trigger system provides sequential or contact operation with an easy depth adjust control for precise countersinking of nails. Also fitted with a tool-free jam release mechanism for easy nail removal. Suitable for the following applications: beading & trim, tongue & groove, panelling and cabinet work. Features: Advanced design Precision Point™ nose with unique contact detect system for reduced marking of work surface80% nose tip reduction for improved accuracy and visibilityTool-free jam release mechanism for easy nail removalEasy depth adjust control for precise countersinking of nailsSelectable trigger system for sequential or contact operation Product Specification: Part number: DPN1850PP-XJBarcode: 5902013958574Magazine Capacity: 100 NailsOperating Pressure: 4.8-8.3 BarNail Length: 15-50mmNail Head Diameter: Crown2Trigger Type: Sequential & BumpAir Consumption Per Actuation: 0.8 LitreLength: 235mmHeight: 240mmWidth: 70mm **images for illustrative purposes only – please refer to description and specification for full details of product**

Read more less

WHATS IN THE BOX 1x DCN930N 18v XR Brushless First Fix 90mm Framing Nailer Body Only 1x Reversible Belt Hook 1x No-Mar Tip Notes From MT Expert Brushless motor delivers longer runtimes, less maintenance and better power control 3 Year Warranty* Overview DeWalt DCN930N-XJ 18V XR Brushless First Fix 90mm Framing Nailer Body Only The DeWalt DCN930N-XJ 18v XR Brushless First Fix 90mm Framing Nailer is an impressive tool that combines power and versatility, featuring both contact trip and sequential firing modes. Users can save up to 20 minutes on setup and cleanup compared to traditional pneumatic nail guns. Its mechanical operation ensures reliable performance in temperatures ranging from -20 to 50 degrees Celsius, requiring minimal maintenance. With no gas emissions, noise, or canisters to manage, this gas-free option significantly cuts down on operating costs. Designed to reduce downtime, the innovative flywheel remains active for six seconds after releasing the trigger, making this lightweight cordless nailer a breeze to use without the hassle of hoses or compressors. The easy nail loading system enhances usability, while the single firing speed guarantees consistent results and straightforward operation. Its compact design allows it to fit seamlessly between 400mm joist centers, and it is compatible with most paper tape nails, optimized for both DNPT (Paper Tape) and DNW (Wire Welded) 50-90mm 30° angled nails. The enhanced loading system provides precise depth control through an extended wheel regulation, and the high-strength magnesium magazine ensures exceptional durability. The unique nose design allows for easy alignment and driving of nails at challenging angles, specifically tailored for 'Toe-Nailing' tasks. For added safety, the nailer features a dry fire lockout to prevent firing when the magazine is empty. At its core, the brushless motor maximizes battery efficiency while minimizing heat generation and maintenance needs. Supplied body only. Batteries and chargers are supplied separately.  FEATURES Brushless motor delivers longer runtimes, less maintenance and better power control Compatible with most paper tape nails on the market and optimized for both DNPT (Paper Tape) and DNW (Wire welded) nails Precise depth control through extended wheel regulation Nose design optimized for toe-nailing Show-up and get right to work with this cordless nailer requiring no compressors or hoses SPECIFICATION Motor: 18v Nail Diameter: 2.8 - 3.3 mm Nail Length: 50 - 90 mm Magazine Angle: 30 - 34 degrees Magazine Capacity: Up to 55 nails Operating Modes: Sequential and bump modes

Read more less

2 x 5.0Ah Li-ion battery 1 x Multi-voltage battery charger -20 to 50°C Temperature range Ergonomic tool design DeWalt DCN692P2B 18V Brushless First Fix Framing Nailer with 2 x 5.0Ah Battery Charger & Bag The DeWalt DCN692 First Fix Framing Nailer is also referred to as a framing nailer. They are used to complete rough woodwork, such as flooring, wood framing, timber frame erection, and roofing, mainly within the construction industry. It offers industry professionals such as roofers, carpenters, and fitters a reliable and efficient nailer to suit their framing needs. This nail gun is able to fire a 90mm ring-shank nail into softwood and 63mm into hardwoods. A combination of intelligent electronics and the Dewalt brushless motor means that even with heavy use, this will last a full day of work without requiring a battery change. Also, the battery pack is placed below the handle to create a well-balanced unit that fits easily between the 400mm centre studs. The unique Bump Mode function of the DCN692N allows the user to fire 2 nails per second, and a tool-free stall/jam clearance minimises user downtime. Features: Dewalt DCN692 First Fix Framing Nailer: 2 speeds - or power levels - optimises the nailer for firing all lengths of nailsBenefits from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nailsBrushless motor gives the possibility to fire a 90mm ring shank nail in softwood and 63mm into hardwoodsThe sequential operating mode allows for precision placement and the bump operating mode provides the user with production speedHigh capacity 5.0Ah XR battery packs offer eXtreme Runtime in both speeds and versatility to share power with your other 18V XR power toolsMechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees celcius and minimal cleaning/service requirementsClass leading vibration and sound figures, offer fantastic user protectionVersatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nailsReversable belt/rafter hook povides increased portability and versatility on the job-siteDepths can be easily adjusted using the thumb wheel depth adjusterIncreased visibility and durability along with protection for work-surface from the non-mar contact-tripErgonomic tool design allows the nailer to fit easily between a 400mm centre studGas free operation offers a significant saving in running costsTool free stall/jam clearance minimises user down timeCordless design so no hanging leads to deal withUser can engage contact trip lock-off and prevent accidental dis-charge of fastenerDry fire lockout ensures that the tool is protected from firing without nails in the magazine Comes with: 1 x Multi-voltage charger2 x 5.0Ah XR Li-ion Battery1 x Heavy duty Tool Bag Product Specification: Dewalt DCN692 First Fix Framing Nailer: Battery chemistry: XR Li-IonVoltage: 18VBattery Capacity: 5.0 AhNail Diameter: 2.8 - 3.3 mmMagazine angle: 30 - 34 °Magazine loading: Rear - loadNail Length: 50 - 90 mmMagazine capacity: Up to 55 NailsFiring mode: Bump & SequentialLength: 345 mmWidth: 125 mmHeight: 338 mmNailer Operating Mode: SelectiveIntegrated Belt Hook: YesJam Clearing: YesImpact energy: 105 JTemperature Range: -20 to 50°CFault indicator: Yes **images for illustrative purposes only – please refer to description and specification for full details of product**  

Read more less

Fires 18ga 50-90mm Nails Fires up to 120/min Bump & Sequential Trigger Action Depth Adjustment DeWalt DCN692N 18V XR Brushless 90mm First Fix Framing Nailer Body Only The DeWalt DCN692N First Fix Framing Nailer is also referred to as a framing nailer. They are used to complete rough woodwork, such as flooring, wood framing, timber frame erection, and roofing, mainly within the construction industry. It offers industry professionals such as roofers, carpenters, and fitters a reliable and efficient nailer to suit their framing needs. This nail gun is able to fire a 90mm ring-shank nail into softwood and 63mm into hardwoods. A combination of intelligent electronics and the Dewalt brushless motor means that even with heavy use, this will last a full day of work without requiring a battery change. Also, the battery pack is placed below the handle to create a well-balanced unit that fits easily between the 400mm centre studs. The unique Bump Mode function of the DCN692N allows the user to fire 2 nails per second, and a tool-free stall/jam clearance minimises user downtime. Features: Two speedsLonger run timeQuicker readiness to fireLess recoilAble to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard WoodsSequential operating mode allows for precision placementBump operating mode provides the user with production speedMechanical rather than gas operation offers consistent performance at temperatures between -20 and 50 degreesWill accept most clipped head, and off centre, round head paper tape or wire weld collated framing nailsReversible belt/rafter hook provides increased portabilityDepths can be easily adjusted using the thumb wheel depth adjusterErgonomic tool designTool-free stall/jam clearance minimises user downtimeCordlessUser can engage contact trip lock-off and prevent accidental discharge of the fastenerDry fire lockout ensures that the tool is protected from firing without nails in the magazine Comes with: 1 x Belt hook (reversible)1 x No mark tip Product Specification: Barcode: 5055990003420Nail Diameter: 2.8 - 3.3 mmMagazine angle: 30 - 34 °Magazine loading: Rear - loadNail Length: 50 - 90 mmMagazine capacity: Up to 55 NailsFiring mode: Bump & SequentialLength: 345 mmWidth: 125 mmHeight: 338 mmNailer Operating Mode: SelectiveIntegrated Belt Hook: YesJam Clearing: YesImpact energy: 105 JTemperature Range: -20 to 50°CFault indicator: Yes **images for illustrative purposes only – please refer to description and specification for full details of product**  

Read more less

WHAT'S IN THE BOX 1x DCN692 Framing Nailer Type 3 Body Only 1x Reversible Belt Hook 1x No Mark Tip Supplied In: Plain Packaging NOTES FROM MT EXPERT Speed selection switch on foot - gives the ability to change between top speed for longer nails and slower speed for smaller nails. Top speed is for use with nails between 71-90 mm, giving approx. x750 nails per 5Ah charge. Slower speed is for use with 50-70 mm nails - this will increase your number of nails per charge up to approx. x1250 1 YEAR WARRANTY* OVERVIEW DEWALT DCN692N 18V XR BRUSHLESS 1ST FIX FRAMING NAILER BODY ONLY TYPE 3 DeWalt brought you the world’s first cordless first fix framing nailer and now they've improved it. Still coming with an efficient brushless motor but it now can run on DCB184 5.0Ah, DCB182 4.0Ah, or DCB183 2.0Ah battery packs (sold separately). The DCN692 benefits from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails. But what makes this first fix nailer so popular with is the fact it runs without gas.  DEWALT DCN692 FEATURES Two speeds or power levels which optimises the nailer for firing all lengths of nails. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees Celsius and minimal cleaning/service requirements Class leading vibration and sound figures, offer fantastic user protection Versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails Reversible belt/rafter hook provides increased portability and versatility on the job-site Depths can be easily adjusted using the thumb wheel depth adjuster Increased visibility and durability along with protection for work-surface from the non-mar contact-trip Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud Gas free operation offers a significant saving in running costs Tool free stall/jam clearance minimises user down time Cordless design so no hanging leads to deal with User can engage contact trip lock-off and prevent accidental dis-charge of fastener Dry fire lockout ensures that the tool is protected from firing without nails in the magazine DEWALT DCN692N SPECIFICATION Compatible Battery Chemistry: XR Li-Ion Voltage: 18v Nail Diameter: 2.8 - 3.3 mm Magazine Angle: 30 - 34 ° Magazine Loading: Rear - load Nail Length (Plain Shank): 50 - 75 mm Magazine Capacity: Up to 55 Nails Trigger Type: Bump & Sequential Length: 345 mm Width: 125 mm Height: 338 mm Weight: 4.1 kg Nailer Operating Mode: Selective Integrated Belt Hook: Yes Jam Clearing: Yes Impact Energy: 105 J Temperature Range: -20 to 50°C Fault Indicator: Yes

Read more less

Brushless motor Reversible belt/rafter hook Ergonomic tool design -20 to 50°C Temperature range DeWalt DCN692N 18V First Fix 90mm Framing Nailer With DCP580N 18V Planer Body T4TKIT-1082 The DeWalt DCN692N XR First Fix Framing Nailer is also referred to as a framing nailer. They are used to complete rough woodwork, such as flooring, wood framing, timber frame erection, and roofing, mainly within the construction industry. This is the complete gun from DeWalt to ease through most nailing jobs. It offers two-speed options for firing a wide range of nail sizes with much less recoil, which makes a big difference when firing short length nails. The magazine is angled at 30 to 34 degrees to deal with most clipped heads and off-center round heads with paper tape or wire weld collated nails. Features: DeWalt DCN692 First Fix Framing Nailer: Two speedsLonger run time, quicker readiness to fire, less recoil and more durability when firing short nailsThe power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard WoodsThe sequential operating modeMechanical operation offers consistent performance at temperature between -20 and 50 degrees CelsiusClass leading vibration and sound figures, offer fantastic user protection.Versatile 30 - 34 degree magazine angle will accept most clipped head and off centre round head framing nailsReversible belt/rafter hookDepths can be easily adjusted using the thumb wheel depth adjusterErgonomic tool design allows the nailer to fit easily between a 400mm centre studCordless designDry fire lockout Dewalt DCP580N Brushless Planer: Brushless Motor - Increased power and runtimeLarge twin blade drum with TCT blades for high quality surface finishOn board blade storage and torx key - for quick and easy blade changes2.0mm Depth of Cut - For large material removalO.1mm increment depth adjustment - For fine adjustmentFront and rear shoe milled in situ - For increased accuracyPart of the intelligent XR Lithium Ion Series designed for efficiency and making applications fasterAir lock port - compatible with air-lock or dust bagFoot lock off - stands the tool above the work surface Comes with: 1 x DCN692N Brushless Framing Nailer Body1 x DCP580N Brushless Planer Body Product Specifications DeWalt DCN692 First Fix Framing Nailer: Barcode : 5035048461655Nail Diameter: 2.8 - 3.3 mmMagazine angle: 30 - 34°Magazine loading: Rear - loadNail Length: 50 - 90 mmMagazine capacity: Up to 55 NailsFiring mode: Bump & SequentialNailer Operating Mode: SelectiveIntegrated Belt Hook: YesJam Clearing: YesImpact energy: 105 JTemperature Range: -20 to 50°CFault indicator: Yes Dewalt DCP580N Brushless Planer: Barcode: 5035048616253No Load Speed: 15,000 rpmMaximum Depth of Cut: 2.0 mmRebating Depth: 9.0 mmPlaner Width: 82 mmShoe Length: 295 mmDrum Diameter: 48 mmWeight: 2.5 kgLength: 370 mmHand/Arm Vibration: <2.5 m/s2Uncertainty K 1 (Vibration): 1.5 m/s²Sound Pressure: 88 dB(A)Sound Pressure Uncertainty: 3 dB(A)Sound Power: 99 dB(A)Sound Power Uncertainty: 3 dB(A) **images for illustrative purposes only – please refer to description and specification for full details of product**

Read more less