DEWALT DCD996NT-XJ CORDLESS BRUSHLESS 18V XRP COMBI HAMMER DRILL BODY ONLY IN CARRY CASE
The DeWalt DCD996 combi hammer is the successor to the DCD995, with an improved, larger brushless motor which delivers up to 34% more power. DeWalt have improved the airflow to this motor which keeps it cool and at the top of its performance. It features an improved automatic high speed for increasing the users masonry drilling speed.
The DCD996N has a 3-speed gear box giving you ultimate control over blows-per-minute and revolutions-per-minute. For example, in gear three while in hammer mode you’ll have 38,250 blows per minute while the chuck spins at 2,250rpm.
There's also a newly improved, 3-stage, bae-mounted LED worklight. It has a maximum brightness of 60 lumens, enough to light up a huge work area and even bright enough to use solely as a torch. There's a sturdy switch built-in to the drill base to control the brightness.
Supplied body only in a TSTAK II Suitcase Flat Top Tool Storage Box with inlay.
FEATURES
- All metal nitro-carburised chuck prolongs life as it is stronger and rust resistant
- Carbide inserts improve bit gripping strength and helps to minimise dropped bit frustrations
- 3 speed gearbox for a greater range of applications
- Larger brushless motor than previous model gives up to 34% increase in power
- Improved air flow to the motor keeps it cool under pressure
- Hammer Function increases speed to 2250rpm giving increased productivity
- Super bright base-mounted LED worklight with 3 LEDs which give a range from 2.6 to a massive 60 lumens
SPECIFICATION
- Voltage: 18v
- Power Output (W): 830
- Soft Application Max Torque (Nm): 66
- Hard Application Max Torque (Nm): 95
- Torque Settings: 11 + Drill
- Brake Type: Electric
- No. of Gears: 3
- LED Job Light: Yes / Delay / Base-mounted
- Battery Capacity Indicator: No
- Battery Compatibility: 18v Lithium-Ion (XR)
- Rotation: Forward / Reverse
- Variable Speed Control Trigger: Yes
- No Load Speed (RPM) High: 0-2250
- No Load Speed (RPM) Med: 0-1500
- No Load Speed (RPM) Low: 0-500
- Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
- Chuck Capacity (mm): 1.5-13.0
- Drill Capacity: Concrete (mm): 13
- Drill Capacity: Metal (mm): 15
- Drill Capacity: Wood (mm): 55
- Impact Rate (BPM) High: 0-38250
- Impact Rate (BPM) Med: 0-25500
- Impact Rate (BPM) Low: 0-8600
- Overall Length (mm): 213
- Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2
- Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.2
- Brushless Motor: Yes
NOISE & VIBRATION
- Sound Pressure Level (LpA): 97 dB (A)
- Sound Power Level (LWA): 108 dB (A)
- Sound Uncertainty (K): 3 dB (A)
- Drilling Concrete Vibration Emission (ah): 15 m/s²
- Drilling Concrete Vibration Uncertainty (K): 3.9 m/s²
- Drilling Metal Vibration Emission (ah): 2.5 m/s²
- Drilling Metal Vibration Uncertainty (K): 1.5 m/s²
