22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Conveniently located push button for forward and reverse.
High comfort grips.
LED job light with afterglow.
One-touch sliding chuck for easy bit changes.
Triple operation mode: Rotary only, hammer only and rotary hammer.
Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.
Ergonomically rubberised handle provides comfortable gripping and more control while minimising hand fatigue and pain.
The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on.
3 orbital settings + straight cut.
Blower will clear the pencil line of dust.
Lightweight and compact.
Tool-less blade change - push in lock system enables very fast blade changes.
LED light will illuminate your cut line.
Smooth and powerful cutting at the high stroke speed at 2,600 spm.
Double insulated.
Soft start.
22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Double safety trigger.
High comfort grips.
Removable dust nozzle.
Makita DHP482 Combi Drill:
Barcode: 0088381699051
Battery Type: Li-ion
Voltage: 18V
Max. in Masonry: 13mm
Max. in Steel: 13mm
Max. in Wood: 38mm
Max. Fastening Torque: S/H 36/62 Nm
Chuck Capacity: 1.5 - 13mm
Torque Settings: 21 + Drill
No Load Speed Hi: 0 - 1,900rpm
Low: 0 - 600rpm
Blows per Minute Hi: 0 - 28,500bpm
Low: 0 - 9,000bpm
Makita DHR202 Rotary Hammer:
Battery Type - Lithium-ion
Charging Time - 22min
Voltage - 18v
Max in concrete - 20mm
Max. in steel - 13mm
Max. in wood - 26mm
Impact energy - 2.0J
Blows per minute - 0-4000bpm
Noise sound pressure - 87dB(A)
Noise sound power - 98dB(A)
Noise K factor - 3dB(A)
No Load Speed - 0-1100rpm
Vibration: Drilling - 3 m/sec²
Vibration K factor - 1.5 m/sec²
Vibration: Hammer Drilling - 14.5 m/sec²
Vibration: Chiselling - 11 m/sec²
Makita DJV180 Jigsaw:
Barcode - 0088381662710
Voltage - 18v
Max in steel - 10mm
Max in wood - 135mm
Strokes per Minute - 0-2600 spm
Stroke Length - 26mm
Noise sound pressure - 78 dB(A)
Noise K factor - 3 dB(A)
Vibration K factor - 1.5 m/sec²
Vibration Cutting Chipboard - 8 m/sec²
Vibration Cutting Sheet Metal - 3.5 m/sec²
Makita DSS611 Circular Saw:
Battery Type - Lithium-ion
Charging Time - 22min
Voltage - 18v
Depth of Cut @ 90° - 57mm
Blade Diameter - 165mm
Depth of Cut @ 45º - 40mm
Depth of Cut @ 50° - 36mm
Bore Diameter - 20mm
Noise sound pressure - 91dB(A)
Noise sound power - 102dB(A)
Noise K factor - 3dB(A)
No Load Speed - 3700rpm
Vibration K factor - 1.5 m/sec²
Vibration: Cutting Chipboard - 2.5 m/sec²
Makita DTD152 Impact Driver:
Battery Type - Lithium-ion
Voltage - 18v
Electric Brake
Variable Speed Control
Impacts - 0-3200 ipm
Drive shank Hex - 6.35mm (1/4")Reverse switch
Standard Bolt - M5-M14
Joblight
No Load Speed - 0-2300rpm
Max Torque - 160Nm
Vibration: Fastening Bolt - 15.5 m/sec²
Vibration K factor - 2 m/sec²
Makita DML815 Torch:
Part Number: DML815
Barcode: 0088381886970
Continuous Runtime: 6.0Ah - 54 hours
Battery: 18V LXT Lithium-ion
Lumens: 160
Luminous Flux: 160lm
Illuminance at 1m: 3,000lx
Overall Length: 272mm
**images for illustrative purposes only – please refer to description and specification for full details of product**
