MAKITA DLX2221ST 18V BRUSHLESS TWIN KIT DHP483 COMBI + DTD155 IMPACT DRIVER INC 2X 5.0AH BATTS

WHAT'S IN THE BOX

• 1x DHP483 Combi Drill
• 1x DHP483 Belt Clip
• 1x DTD155 Impact Driver
• 1x DTD155 Belt Clip
• 2x 5.0Ah Batteries
• 1x Charger
• 1x Carry Case

MAKITA DLX2221ST 18V BRUSHLESS TWIN KIT DHP483 COMBI + DTD155 IMPACT DRIVER INC 2X 5.0AH BATTERIES, 1X DC18SD CHARGER AND 1X CARRY CASE

The Makita DLX2221ST is a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring electronic 2-speed impact power selection. The impact driver has been developed as an 18 volt version of the CXT TD111D. This 2-piece kit comes with 2x 5.0Ah Batteries, DC18SD Charger and a Carry Case.

Makita DHP483ZJ 18v LXT Brushless 2-Speed Combi Drill

The Makita DHP483 has been developed for light duty tasks, with compact body and great endurance thanks to its brushless motor. At only 176mm long and 1.6 Kg with a 3Ah+ battery attached, this drill can be used above your head or in tight spaces with minimal fatigue.

FEATURES

• Variable 2-speed, reversible, Makita Brushless Motor
• Brushless motor for more power and longer runtimes - no brushes to replace therefore easier to maintain
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand
• Incorporates Makita's new battery protection system that provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
• Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
• 20 clutch settings deliver up to 40 Nm of torque
• All metal gears for more efficient power transmission
• Ultra-compact design (only 176mm long)
• Twin led jobs light with pre-glow and after-glow functions
• Ergonomically designed high comfort grip
• Specially developed for light drilling / screw work

SPECIFICATION

• Voltage: 18v
• Soft Application Max Torque (Nm): 23
• Hard Application Max Torque (Nm): 40
• Torque Settings: 20 + Drill
• Brake Type: Electric
• No. of Gears: 2
• LED Job Light: Yes / Twin / Pre-glow
• Battery Capacity Indicator: No
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM) High: 0-1,700
• No Load Speed (RPM) Med: N/A
• No Load Speed (RPM) Low: 0-500
• Chuck Type: 3-Jaw / Single Sleeve Keyless
• Chuck Capacity (mm): 1.5 - 13
• Screw Capacity: Machine Screw (mm): 6
• Screw Capacity: Wood Screw (mm): 6 x 75
• Drill Capacity: Concrete (mm): 13
• Drill Capacity: Metal (mm): 13
• Drill Capacity: Wood (mm): 36
• Impact Rate (BPM) High: 0-25500
• Impact Rate (BPM) Med: N/A
• Impact Rate (BPM) Low: 0-7500
• Overall Length (mm): 176
• Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.3
• Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.6
• Brushless Motor: Yes

Makita DTD155Z LXT 18v Li-Ion Brushless Cordless Impact Driver

The Makita DTD155 is a cordless, Brushless Impact Driver powered by 18v Li-ion battery and has been developed as an 18 volt version of the TD111D. It features Makita's new impact mode, "A-Mode" aka "Assist Mode" which helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening.

FEATURES

• 3 operating modes allow a wide range of applications: 2 speed levels + "A Mode"
• "Assist Mode": Assisted screwing with push button, soft & slow start -> automatic acceleration -> tightening with maximum speed
• BL Motor without carbon brushes: no maintenance and low energy consumption, therefore longer battery life
• Enhanced moisture and dust protection with the XPT system (eXtreme Protection Technology)
• Ergonomic design for optimum hand control
• Ergonomic handle with soft coating for high working comfort
• One-touch bit installation with 1/4" hex chuck
• Powerful double LED lighting
• Electric brake
• Variable speed control by trigger
• Forward and reverse rotation

SPECIFICATION

• Voltage: 18v
• Max Torque (Nm): 140
• Brake Type: Electric
• LED Job Light: Yes / Twin
• Battery Capacity Indicator: No
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Rotation: Forward & Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM): H: 0-3000 S: 0-1300
• Machine Screw Capacity: M4-M8
• Standard Bolt Capacity: M5-M14
• High Tensile Bolt Capacity: M5-M12
• Coarse Thread Length Capacity (mm): TBC
• Max. Impacts Per Minute (ipm): H: 0-3900 S: 0-1600
• Driving Shank: 1/4" Hex
• Overall Length (mm): 135
• Net Weight (Kg with 1.5/2Ah Battery): 1.2
• Net Weight (Kg with 3/4/5Ah Battery): 1.5
• Brushless Motor: Yes